As an Amazon Associate I earn from qualifying purchases.1. SÜA
Nitrogen Gas Regulator 0-600 PSIG, SÜA, Pressure Charge, 1/4" Flare Connector, with 60" Charging Hose., HVAC Purging
SÜA - Full-size - 2" easy to read gauges with rubber protectors. Delivery pressure range: 20-600 psi - maximum inlet Pressure: 3, Argon, 000 psi - For its use with inert gases like Nitrogen, and Helium.
1/4" male flare outlet connection, Fits HVAC Charging Hoses for Purging and Pressure Testing. This is an original sÜa regulator manufactured in solid brass.
Available options: regulator only and regulator with Refrigeration Hose, 60 inches Long, 800 PSI Max Pressure and 1/4" Female Flare Connections. Hvac purging / leakage tests / inertization / pressure test / shock Absorbers Charge - CGA-580 Inlet Connector, Helium, Fits all Nitrogen, Argon, and Inert Tanks.
| Brand | SÜA |
| Manufacturer | SÜA |
| Weight | 4 |
| Part Number | SMP400_RH |
2. Esab
25 psig Outlet Pressure, Victor Technologies 0781-2743 HRF-1425-580 Light Duty Flow Meter Cylinder Nitrogen/Argon/Helium Regulator with 10' Hose, 50-38 SCFH Flow Range
Esab - Gas service: argon, argon/CO2 mix. Maximum inlet: 3000 psig, outlet pressure: preset HRF 1425- 25 psig. Cga 580 connection: Nitrogen, argon, helium. Up to 50 cfh for argon and up to 38 cfh for CO2 delivery. Outlet connection: 5/8 inch.
| Brand | Esab |
| Manufacturer | Victor |
| Height | 7.62 cm (3 Inches) |
| Length | 40.64 cm (16 Inches) |
| Weight | 1.3 kg (2.87 Pounds) |
| Width | 25.4 cm (10 Inches) |
| Part Number | 0781-2743 |
| Model | 0781-2743 |
3. RX WELD
RX WELD Nitrogen Regulator with 0-600 PSI Delivery Pressure Equipment Brass Inlet Outlet Connection Gauges With 6.6Ft Refrigeration Hose
RX WELD - Output: adjustable - 0-400psi. The display show 600psi that you can rate them at 400PSI, but they are able to go up to 600PSI. Durable brass piston designed diaphragm, self re-seating relief valve not designed to protect downstream system.
Regulator with refrigeration hose, 65 inches long, 600 psi max pressure and 1/4" SAE Female Flare Connections. Great for hvac purging / inertization / Pressure Tests / Brazing / Leakage Tests / Soldering.
Cga580 inlet connection, 1/4" sae male flare outlet Connection and Easy to Read 2 Inch Gauges with Protective Rubber Gauge Boots. Pressure- input: 0-4000psi. Large brass tee handle with stainless steel pressure adjusting screw and regulator bushing that prevents galling.
4. Garosa
Inert Gas Hose Rubber Brass Gas Hose Nut 1/4 Inch High Flexibility Compressed Air Hose Welding Union for Air, Compressed Air, Nitrogen,CO22M, Argon
Garosa - High pressure resistant - High quality rubber hose, good toughness, high pressure resistant, anti-aging. Precision workmanship - Precision machined threads ensure firm connection.
High flexibility - High flexibility hose, can be bent randomly without deformation. Wide use - suitable for air, argon, compressed air, nitrogen and carbon dioxide. Good stability - rugged brass connector, not easy to corrode, good stability.
| Brand | Garosa |
| Manufacturer | Garosa |
| Height | 0 cm (0 Inches) |
| Length | 0 cm (0 Inches) |
| Weight | 0.1 kg (0.22 Pounds) |
| Width | 0 cm (0 Inches) |
| Part Number | Garosaphdxazs1t9-12 |
| Model | Garosaphdxazs1t9-12 |
5. N /A
Argon CO2 Flow Meter Regulator Hose with Inert Gas Fitting Adaptor for Argon Co2 Regulator to Mig Welder Gas Pipe Brass Silicone Pipe
N /A - Can be used as the pipe connecting the regulator flow meter to welding machine to. Deliver shielding gas. 1/4 inch g-thread adopts brass material, it fits for most pipes and easy to install.
Suitable for conveying shielding gas, nitrogen, such as compressed air, argon and carbon dioxide. Ideal for mag / MIG welding machines.
6. Hyuduo
Argon, Nitrogen 2.0m, Inert Gas Hose, Rubber Brass Gas Hose Nut 1/4 Inch High Flexibility Compressed Air Hose Welding Union Compressed Gun Connecting Pipe for Air, Compressed Air
Hyuduo - Excellent performance: this air hose uses high quality rubber hose, high pressure resistance and aging resistance, heavy brass gaskets, which has good toughness, not easy to corrode and good stability .
If you have any questions about our products, please contact us and we will give you a satisfactory answer. Scope: the gas shield hose is approved to be used for air, nitrogen, argon and carbon dioxide.
The pipe is 5 / 2m long and can be used flexibly. 1/4 "thread, compressed air, suitable for most pipes, easy to install. Function: this air hose is used as the hose between the regulator flowmeter and the MIG welding machine or wire feeder to supply the shielding gas to the MIG welding gun.
The highly flexible hose can be bent at will without deformation. 1. After-sales service: we strive to provide high-quality and convenient service for you. Sturdy link: precision machined threads can ensure a firm connection.
| Brand | Hyuduo |
| Manufacturer | Hyuduo |
| Height | 0 cm (0 Inches) |
| Length | 0 cm (0 Inches) |
| Weight | 0.1 kg (0.22 Pounds) |
| Width | 0 cm (0 Inches) |
| Part Number | Hyuduobvdm9k5a6s-12 |
7. Hansun
1.5m MIG/MAG Gas Hose Adaptor, Argon CO2 Regulator 1/4" Thread Welding Air Pipe
Hansun - The protective gas hose is approved for air, nitrogen, compressed air, argon and CO2. Great replacement for you if you wants to replace a new one. 1/4" fitting thread, fit for most hosees and easy to install. 1. 5m long hose for flexible use.
Used as the hose connecting the regulator flow meter to a MIG welding machine or wire feeder to deliver shielding gas to the MIG gun. Mig / tig welding application, ideal for commercial, industrial and laboratory. Also be used for TIG torches as either a shielding gas hose or water.
8. Aramox
Gas Hose, 4.9ft Gas Hose for for Argon Flowmeters Regulators Rubber MIG/MAG Connection Cable with G1/4 Thread for Compressed Air Nitrogen Argon
Aramox - Hose included: 4. 9ft long length, flexible to use. Premium material: mig connection Hose is made of premium rubber material, sturdy, good toughness, long durability.
Fit for: argon hose applicable to air, compressed air, nitrogen, argon and carbon dioxide. G1/4 thread, easy to install, just tighten the nut. If the product install or quality have any problem, please contact us in time.
We will solve it as soon as possible. Mig connection: argon hose is manufactured according to iso 3821 EN 559 ensures excellent quality. Gas hose can withstand pressure of up to 20bar and can withstand cold at ‑30°C. Purchase notice : we value the shopping experiences and satisfaction of each customer, so we provide technical support.
| Brand | Aramox |
| Manufacturer | Aramox |
| Height | 1 cm (0.39 Inches) |
| Length | 1 cm (0.39 Inches) |
| Weight | 0.24 kg (0.53 Pounds) |
| Width | 1 cm (0.39 Inches) |
| Part Number | Aramoxpgacdg07yi1833 |
| Model | Aramoxpgacdg07yi1833 |
SÜA - Full-size - 2" easy to read gauges with rubber protectors. Delivery pressure range: 20-600 psi - maximum inlet Pressure: 3, Argon, 000 psi - For its use with inert gases like Nitrogen, and Helium.
RX WELD - Output: adjustable - 0-400psi. The display show 600psi that you can rate them at 400PSI, but they are able to go up to 600PSI. Durable brass piston designed diaphragm, self re-seating relief valve not designed to protect downstream system.
Garosa - High pressure resistant - High quality rubber hose, good toughness, high pressure resistant, anti-aging. Precision workmanship - Precision machined threads ensure firm connection. High flexibility - High flexibility hose, can be bent randomly without deformation. Wide use - suitable for air, argon, compressed air, nitrogen and carbon dioxide. Good stability - rugged brass connector, not easy to corrode, good stability.
N /A - Can be used as the pipe connecting the regulator flow meter to welding machine to. Deliver shielding gas. 1/4 inch g-thread adopts brass material, it fits for most pipes and easy to install. Suitable for conveying shielding gas, nitrogen, such as compressed air, argon and carbon dioxide. Ideal for mag / MIG welding machines.
Hyuduo - Excellent performance: this air hose uses high quality rubber hose, high pressure resistance and aging resistance, heavy brass gaskets, which has good toughness, not easy to corrode and good stability .
Hansun - The protective gas hose is approved for air, nitrogen, compressed air, argon and CO2. Great replacement for you if you wants to replace a new one. 1/4" fitting thread, fit for most hosees and easy to install. 1. 5m long hose for flexible use. Used as the hose connecting the regulator flow meter to a MIG welding machine or wire feeder to deliver shielding gas to the MIG gun. Mig / tig welding application, ideal for commercial, industrial and laboratory. Also be used for TIG torches as either a shielding gas hose or water.
Aramox - Hose included: 4. 9ft long length, flexible to use. Premium material: mig connection Hose is made of premium rubber material, sturdy, good toughness, long durability.
