DOITOOL - High quality: mounting bracket fixing clip is made of fire-proof plastic. Use this connection box to join cuted LED strip light together. This product is a must-have component for your strip light.
Flexible and durable wire, you can twist and extend it freely as you like, so there is no angle limit to your led strip lighting system. Convenient to plug into 4 pin rgb led strip, no solder required. Connection.
Nicelux - Connect your led strip to power or dimmer without any soldering, just a pliers needed. Applicable for smd5050 / smd2835 / smd5630 / smd5730 strip light in different leD density ranging 30~90 LEDs per meter.
And workable to strip light with 3M VHB red adhesive tape. Innovative fixing bar and piercing contact design will grip strip light tightly, never worry strip light or wire moving out of connector.
Clear cap connector that will not mask light of first LED. No need stripping wire before connection, really allow user to insert & press to connect with a 'CLICK'sound. Allow you to diy both strip-to-strip-bridgejumper and strip-to-power connector wire that is up to 3 meter long. Will not leave dark area in your lighting space.
BTF-LIGHTING - Note: the fcob led strip can work perfectly even if the mating contacts of the clips do not make contact with the copper traces. Please use the connector corresponding to the light strip. Choose from board-to-board, wire-to-wire and board-to-wire connections at will.
This product does not include the light strip, controller or power supply. Making it easier than ever to enjoy colourful lighting effects.
This connector is only compatible with 8mm width fcob cob led strips. 8mm led connectors are flexible, insensitive to bending or twisting at all angles and will not break. Easy to operate.
Please note: the connectors are disposable and must be broken before the LED strip is pulled out. When connecting ip65/ip67 waterproof LED strips, the silicon gel must be removed from the surface of the soldering area. Widely compatible. Good compatibility for multi-use scenario compatibility, board-to-wire at will. No soldering required. Cost effective. Easy to install.
YAJIERUI - A value pack! package included: 10 x led strip connector with pigtail, 4 x Waterproof Strip ConnectorStrip to Wire ? 5m Extension Cable, 10 x 2pin solderless Connectors, 20 x LED Strip Clips with Screws.
Operating condition: support 0-4a current and 0-24V voltage input, 20 ~ 80 degree heat resistance level. Warm tip: must peeled off the silicon gel on the surface of soldering area, when you connecting waterproof LED strip lights with these LED strip connectors, and they are not suitable for high intensity 120LEDs/M 3528 or 2835 strips.
Application: the 8mm led strip connector kit suitable for waterproof and non-waterproof SMD 3528 2835 single color LED strip lights. Diy accessory kit : a perfect accessory kit for your LED strips, included most of the connectors to meet your needs.
Xiaochen - Connector type: jsT SM 2 pin male and female connector. High temperature resistance, light weight, no looseness, aging resistance, reliable safety connection, corrosion resistance, keep the wires in good condition.
Made of high quality material, durable and high precision. Color: black &RedConnectormaterial: plastic and metal. This set of male and female electrical wires can be widely applied, indoor 3D plane, such as mini remote control helicopter, LED strips and twinkle light.
BGTXINGI - 4. Material: tinned copper wire, plastic head at each end. The specifications are general and standard, suitable for general use. 150mm/5. 9 inches in length, the cable wire type is 26 AWG. For jst ph 4 pin micro connector fits well with plug, easy to install and use.
3. Cable type: 2mm-4p pitchpin / hole. High quality and widely use: it adopts environmental protection materials, durable, widely used in electrical appliances, etc.2
2. Length of wire: each adapter has two wires, one black and the other red, and they are all similar. Terminal spacing is 2. 0 mm/ 008 inch, the pins are sturdy, will not loose easily. 5.
Suitable for use, easy to install. Suit well for batteries balance charger plug, air plane, PCB control panel, speakers, for JST PH 2.0 4-pin connectors are good partners for helicopter, quadcopter, automobiles, household appliances, LED strips, conductive, toys, batteries, toys, lighting, cold and high temperature resistance, audio, robots, boat and car controller.1. Quantity: 80pcs, 40pairs, 40pcs 4-pin 2.
BGTXINGI - Each adapter has two wires, one black and the other red, and they are all similar. Quantity: 100pcs, 50pcs male connection plug. This cable type is 24aWG, the specifications are general and standard, suitable for general use.
Cable type: 2 pin. 5. Suitable for use, 50pcs female connection plug, 50pair, easy to install.4. 3. 135 mm long and 1. 8 mm in diameter. Length of wire: 150mm/5.
9''. High quality and widely use: adopt environmental protection materials, toys, robots, automobiles, LED strips, durable, conductive, widely used in electrical appliances, batteries, lighting, cold and high temperature resistance, toys, speakers, audio, household appliances, PCB control panel, etc. 1. 2. Material: tinned copper wire, plastic head at each end.
BGTXINGI - 4. Material: tinned copper wire, plastic head at each end. 2. Length of wire: each adapter has 4 wires, 4 colors, the cable wire type is 26 AWG. Suitable for use, 20pairs, 20pcs 4-pin 2. 0mm female connection plug, easy to install.
150mm/5. 9 inches in length, easy to identify, suitable for general use. High quality and widely use: it adopts environmental protection materials, durable, cold and high temperature resistance, household appliances, audio, robots, toys, etc.
Suit well for batteries balance charger plug, lighting, conductive, speakers, toys, widely used in electrical appliances, air plane, batteries, LED strips, for JST PH 2.0
0 4-pin connectors are good partners for helicopter, automobiles, quadcopter, PCB control panel, boat and car controller.5. Terminal spacing is 2. 0 mm/ 008 inch, will not loose easily. 1. Quantity: 40pcs, 20pcs 4-pin ph 2. 0 male connection plug. For jst ph 4 pin micro connector fits well with plug, the pins are sturdy, easy to install and use.
BGTXINGI - 1. 2. Length of wire: each adapter has two wires, one black and the other red, and they are all similar. Material: tinned copper wire, plastic head at each end. 5. The specifications are general and standard, suitable for general use.
Cable type: 1mm-2p 3p 4p 5ppitchpin / hole. 4. Quantity: 50pcs compatible with jst SH 2/3/4/5 connection plug connection. Suitable for use, easy to install. Suit well for batteries balance charger plug, automobiles, air plane, speakers, boat and car controller.3
3. High quality and widely use: it adopts environmental protection materials, toys, batteries, lighting, cold and high temperature resistance, conductive, LED strips, household appliances, these micro connectors are good partners for helicopter, widely used in electrical appliances, audio, durable, toys, PCB control panel, robots, etc.
For jst sh 2 pin 3pin 4pin 5pin micro connector fits well with plug, easy to install and use. 150mm/3. 9 inches in length, the cable wire type is 28 AWG. Terminal spacing is 2. 0 mm/ 008 inch, the pins are sturdy, will not loose easily;.
JIAN - Condition: 100% brand new and High Quality ! Type: 2pin Connector. 20*17*13. 5mm. Color: white, as picture shows. Size: approx. Package included:26pcs+1boxx quick splice wire connector.
DOITOOL - High quality: mounting bracket fixing clip is made of fire-proof plastic. Use this connection box to join cuted LED strip light together. This product is a must-have component for your strip light. Flexible and durable wire, you can twist and extend it freely as you like, so there is no angle limit to your led strip lighting system. Convenient to plug into 4 pin rgb led strip, no solder required. Connection.
Nicelux - Connect your led strip to power or dimmer without any soldering, just a pliers needed. Applicable for smd5050 / smd2835 / smd5630 / smd5730 strip light in different leD density ranging 30~90 LEDs per meter.
BTF-LIGHTING - Note: the fcob led strip can work perfectly even if the mating contacts of the clips do not make contact with the copper traces. Please use the connector corresponding to the light strip. Choose from board-to-board, wire-to-wire and board-to-wire connections at will.
YAJIERUI - A value pack! package included: 10 x led strip connector with pigtail, 4 x Waterproof Strip ConnectorStrip to Wire ? 5m Extension Cable, 10 x 2pin solderless Connectors, 20 x LED Strip Clips with Screws.
Xiaochen - Connector type: jsT SM 2 pin male and female connector. High temperature resistance, light weight, no looseness, aging resistance, reliable safety connection, corrosion resistance, keep the wires in good condition. Made of high quality material, durable and high precision. Color: black &RedConnectormaterial: plastic and metal. This set of male and female electrical wires can be widely applied, indoor 3D plane, such as mini remote control helicopter, LED strips and twinkle light.
BGTXINGI - 4. Material: tinned copper wire, plastic head at each end. The specifications are general and standard, suitable for general use. 150mm/5. 9 inches in length, the cable wire type is 26 AWG. For jst ph 4 pin micro connector fits well with plug, easy to install and use.
BGTXINGI - Each adapter has two wires, one black and the other red, and they are all similar. Quantity: 100pcs, 50pcs male connection plug. This cable type is 24aWG, the specifications are general and standard, suitable for general use.
BGTXINGI - 4. Material: tinned copper wire, plastic head at each end. 2. Length of wire: each adapter has 4 wires, 4 colors, the cable wire type is 26 AWG. Suitable for use, 20pairs, 20pcs 4-pin 2. 0mm female connection plug, easy to install.
BGTXINGI - 1. 2. Length of wire: each adapter has two wires, one black and the other red, and they are all similar. Material: tinned copper wire, plastic head at each end. 5. The specifications are general and standard, suitable for general use.
